OSRAM makes installation even easier
 
LUMILUX COMBI EL luminaires offer more than just durability and low energy consumption. OSRAM has also made them remarkably user friendly. Clever installation solutions guarantee that your new lamp will be in place as quickly as possible, so you can enjoy your OSRAM luminaires right from the start.
 
 

 
Practical keyhole openings make it easy to perfectly adjust the lamp during installation. This gives end customers more flexibility, just in case the holes for the wall plugs were not drilled in precisely the right places.
 
 

 
Both the F and the F/P versions include a spacer to allow the connecting cable to run behind the lamp.
 
 

 
Angle brackets are included with the N and N/P versions for greater installation flexibility, allowing the lamp to be rotated 90°.
 
 

 
Strip connectors on the F versions are behind a removable cover. The position of the strip connectors can be adjusted to suit various cable entries.
 
 

 
Changing fluorescent lamps has never been easier: Just push down on the stops on the ends of the luminaire, pull outwards, and remove.
 
 

 
The LUMILUX COMBI EL can be installed in confined spaces. Only 30 mm of space is required on all 4 sides.
 
 
Note:
N and N/P versions include angle brackets; F and F/P versions include spacers.
 
Overview of available information from OSRAM in the form of PDF files.
 

LUMILUX COMBI EL Installation instructions (130 KB)