ICUTRONIC FIT CS
Характеристики продукта
- Напряжение питания: 220 240 В
- Частота напряжения сети питания: 50 Гц | 60 Гц
- Сетевое напряжение: от 198 до 254 В
- Безопасность в соответствии с EN 61347-1, 61347-2-13, 62384
- Fixed output (no dimming)
Преимущества продукта
- Более высокое качество освещения благодаря низкому выходному пульсирующему току
- Long lasting and high reliability
- Safety ensured by OSRAM (SELV)
Products
Product |
|
|
|
|
|
Технические данные продукта | ||
---|---|---|---|---|---|---|---|---|
IT FIT 20/220
240/500 CS
|
23 42 В | 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 мА | 97,0 mm | 43,0 mm | 29,5 mm | |||
IT FIT 30/220
240/700 CS
|
23 42 В | 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 мА | 97,0 mm | 43,0 mm | 29,5 mm | |||
IT FIT 40/220
240/1A0 CS
|
23 42 В | 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 мА | 97,0 mm | 43,0 mm | 29,5 mm | |||
IT FIT 20/220...240/500 CS I
|
23 42 В | 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 мА | 145,0 mm | 43,0 mm | 28,0 mm | |||
IT FIT 30/220...240/700 CS I
|
23 42 В | 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 мА | 145,0 mm | 43,0 mm | 28,0 mm | |||
IT FIT 40/220...240/1A0 CS I
|
23 42 В | 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 мА | 145,0 mm | 43,0 mm | 28,0 mm |
Information about Family
Области применения
- Подходит для внутреннего применения в системах БСНН
- Возможна установка и независимый монтаж при помощи комплекта кабельных зажимов
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.