OPTOTRONIC FIT D NFC IND L
Характеристики продукта
- Частота напряжения сети питания: 0 Гц | 50 Гц | 60 Гц
- Versatile scope of application due to output power range of up to 300 W
- Напряжение питания: 220 240 В
- Available with output current range: up to 1,600 mA
Преимущества продукта
- Защита от сильного перенапряжения: до 4 кВ (L-N) / / 4 кВ (L/N-PE)
Products
Product |
|
|
|
|
|
Технические данные продукта | ||
---|---|---|---|---|---|---|---|---|
OT FIT 75/220...240/550 D NFC IND L
|
64 300 В | 125 550 мА | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 100/220
240/700 D NFC IND L
|
64 300 В | 200 700 мА | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 150/220
240/1A0 D NFC IND L
|
64 300 В | 250 1000 мА | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 300/220...240/1A6 D NFC IND L
|
60 300 В | 250...1550 мА | 360,0 mm | 46,0 mm | 28,0 mm |
Information about Family
Области применения
- Установка в системы аварийного освещения согласно МЭК 61347-2-3, приложение К (J)
- Подходит для установки в системы аварийного освещения согласно EN 60598-2-22
- Подходит для использования в светильниках с классом защиты I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.