BA-L-CP-810-24-G5
- Energy saving with high efficacy
- Backside injection technology for high protection level
- Flammability rating at V0
- Channel letters
- Signage boxes
- Luminous areas and ceilings
Технические данные
Электрические параметры
Номинальное напряжение
24,0 В
Номинальная мощность в ваттах на цепь
43,20 Вт
Ном. мощность в Вт. на LED модуль
1.2 Вт
Accidental reverse input voltage protection up to
24 В
Диапазон входных напряжений тока
23.4...24.9 В
Тип тока
Постоянный ток
Фотометрические данные
Цветовая температура
10000 K
Индекс цветопередачи Ra
>80
Цветность светодиода
Cold white
Световой поток на цепь модуля
5400 лм
Световой поток на светодиодный модуль
150 лм
Световая отдача
125 лм/Вт
Стандартное отклонение эллипса соотв.
≤3 sdcm
Luminous flux per chain at Ta 25 °C
5400 лм
Светотехнические параметры
Угол излучения
155 °
Информация о светодиодном модуле
Количество светодиодов в модуле
2
Количество светодиодных модулей на цепь
36
Минимальное количество LED модулей
1
Размеры и вес
Длина
11100,0 mm
Ширина
17,8 mm
Высота
12,1 mm
Вес продукта
468,00 g
Температуры и условия управления
Диапазон температур в процессе работы
-25 75 °C
t хранения
-25 85 °C
Срок службы
Срок службы
50000 h
Дополнительные данные
Комментраий о продукте
Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/Актуальные светотехнические данные, важные указания по технике безопасности, установке и применению см. по ссылке www.osram.com/led-systems./В связи с комплексным процессом производства светодиодов приведенные стандартные показатели технических параметров светодиодов представляют собой лишь статистические величины, которые необязательно соответствуют фактическим техническим параметрам каждого отдельного изделия.
ID of contained light source [AGGR]
LS_SHZ_600801
Возможности / мощности
С регулировкой яркости
Да
Диапазон регулировки яркости
1 100 %
Сертификаты и Стандарты
Энергопотребление
44 кВт⋅ч/1000 ч
Тип защиты
IP66
Стандарты
Acc. to EN 62471:2008/Acc. to IEC 62031/ENEC/CE/UL
Energy efficiency class of the contained light source
E
Сертификация/Соответствие стандартам
CE / ENEC 25 / cURus / UKCA / BIS
Условия поставки
Код заказа
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
31-03-2023
Primary Article Identifier
4052899627390
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Информация об упаковке
EAN |
тип |
Штук |
Размеры |
Масса |
Объем |
---|---|---|---|---|---|
4052899627390 |
BT
| 1 | 479.00g | ||
4052899628274 |
VS
| 15 | 355mm x 255mm x 240mm | 7685.00g | 21.73дм³ |
Загрузки
Accessories optional
Information about Family
- Each LED module contains 2 LEDs
- Compatible with OSRAM OPTOTRONIC constant voltage drivers / dimmers
- Color consistency in 3 SDCM
- Patented Square Lens technology
- Wide CCT and color options available
- IP66 rating
- Lifetime (L80/B10): 50,000 h (temperature at Tc = 75 °C)
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Products
Product |
|
|
|
|
|
Технические данные продукта | ||
---|---|---|---|---|---|---|---|---|
BA-L-CP-810-24-G5
|
10000 K | >80 | 150 лм | 1.2 Вт | 125 лм/Вт |