OPTOTRONIC - 2DIM High Power IP67 AUX12
Характеристики продукта
- Available with different wattage: 400 W, 600 W
- Напряжение питания: 220 240 В
- AUX 12V output for sensor and wireless node
- Wide output current range
Преимущества продукта
- Easily programmable by OT Programmer-S; (AstroDIM / Constant lumen)
- Эффективное и надежное
- 2DIM functionality in one device (AstroDIM, 1 10 V)
- Защита от сильного перенапряжения: до 10 кВ
- Высокая гибкость благодаря широкому диапазону рабочих температур -40 55°C
- Lifetime: up to 100,000 h
- 5 years guarantee
Products
Product |
|
|
|
|
Технические данные продукта | ||
---|---|---|---|---|---|---|---|
OT 600/220...240/ 2A1 2DIM P7 AUX12
|
1750 2100 мА | 2610 mm | 1250 mm | 435 mm | |||
OT 400/220...240/ 1A4 2DIM P7 AUX12
|
1050 1400 мА | 2520 mm | 895 mm | 445 mm |
Information about Family
Области применения
- Area lighting
- Stadium lighting
- Horticulture lighting
- Уличное и городское освещение
- Подходит для использования в светильниках с классом защиты I
Ссылки
* For more information on the multi-level guarantee and the terms and conditions of the guarantee visit https://www.inventronics-light.com/multilevel-guarantees
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.